D-Link DFL-260E CLI Guide for DFL-260E - Page 171
ARPNDSettings
View all D-Link DFL-260E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
3.52. Settings Chapter 3. Configuration Reference 3.52. Settings This is a category that groups the following object types. 3.52.1. ARPNDSettings Description Advanced ARP/Neighbor Discovery-table settings. Properties ARPMatchEnetSender ARPQueryNoSenderIP ARPSenderIP UnsolicitedARPReplies ARPRequests ARPChanges StaticARPChanges ARPExpire ARPExpireUnknown ARPMulticast ARPBroadcast ARPCacheSize ARPHashSize ARPHashSizeVLAN LogResolveFailure NDRateLimit The Ethernet Sender address matching the hardware address in the ARP data. (Default: DropLog) If the IP source address of an ARP query (NOT response!) is "0.0.0.0". (Default: DropLog) The IP Source address in ARP packets. (Default: Validate) Unsolicited ARP replies. (Default: DropLog) Specifies whether or not the ARP requests should automatically be added to the ARP table. (Default: Drop) ARP packets that would cause an entry to be changed. (Default: AcceptLog) ARP packets that would cause static entries to be changed. (Default: DropLog) Lifetime of an ARP entry in seconds. (Default: 900) Lifetime of an "unknown" ARP entry in seconds. (Default: 3) ARP packets claiming to be multicast addresses; may need to be enabled for some load balancers/ redundancy solutions. (Default: DropLog) ARP packets claiming to be broadcast addresses; should never need to be enabled. (Default: DropLog) Number of ARP entries in cache, total. (Default: 4096) Number of ARP hash buckets per physical interface. (Default: 512) Number of ARP hash buckets per VLAN interface. (Default: 64) Specifies whether or not to log failed ARP Resolves. (Default: Yes) Rate limit originated ND packets. (Default: 1000) 171