D-Link DFL-260E Log Reference Guide for DFL-260E - Page 337

2.28. NATPOOL Chapter 2. Log Message Reference 2.28. NATPOOL These log messages refer to the NATPOOL (Events related to NAT Pools) category. 2.28.1. uninitialized_ippool (ID: 05600001) Default Severity Log Message Explanation Gateway Action Recommended Action Revision Parameters ERROR NATPool has not been initialized The NATPool is not initialized. This can happen if the NATPool contains no valid IP addresses. If the NATPool is configured to use an IPPool, no IP addresses have been received form the IPPool. drop If the NATPool is configured to use an IPPool, verify that addresses have been loaded from IPPool. 1 poolname 2.28.2. removed_translation_address (ID: 05600002) Default Severity Log Message Explanation Gateway Action Recommended Action Revision Parameters WARNING Translation IP address does no longer exist in NATPool The translation IP has been removed by a configuration change. The connection is no longer valid and will be closed. close None. 1 address poolname 2.28.3. reconf_state_violation (ID: 05600003) Default Severity Log Message Explanation Gateway Action Recommended Action NOTICE State violation during re-mapping to STATFUL NATPool . The NATPool's configuration has changed to STATEFUL. This connection's translation IP violates the stateful NATPool. Connection will remain open but will no longer be attached to this NATPool. decouple None. 337