D-Link DFL-260E Log Reference Guide for DFL-260E - Page 457

2.47.7. enet_hw_sender_multicast (ID: 04400416) Chapter 2. Log Message Reference Gateway Action Recommended Action Revision Context Parameters rewrite None. 1 Rule Name Packet Buffer 2.47.7. enet_hw_sender_multicast (ID: 04400416) Default Severity Log Message Explanation Gateway Action Recommended Action Revision Context Parameters WARNING Ethernet hardware sender is a multicast address. Dropping. The Ethernet hardware sender address is a multicast address. The packet will be dropped. drop Investigate if there are equipment sending packets using a multicast address as sender MAC address. If there are, try to change the behaviour of that equipment. 1 Rule Name Packet Buffer 2.47.8. relay_stp_frame (ID: 04400417) Default Severity Log Message Explanation Gateway Action Recommended Action Revision Parameters INFORMATIONAL Relaying STP frame from to switched interfaces An incomming STP frame has been relayed to all switched interfaces in the same switch route as [recif]. allow None. 1 recvif 2.47.9. dropped_stp_frame (ID: 04400418) Default Severity Log Message Explanation Gateway Action INFORMATIONAL Dropping STP frame from An incomming STP frame has been dropped. drop 457