D-Link DGS-3620-52P Hardware Installation Guide - Page 24
Installing the Switch without a Rack, Installing the Switch in a rack
View all D-Link DGS-3620-52P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Hardware Installation Guide Installing the Switch without a Rack First, attach the rubber feet included with the Switch if installing on a desktop or shelf. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the Switch and any other objects in the vicinity. Figure 2-1 Attach rubber feet to the switch. Installing the Switch in a rack The Switch is mounted to a standard 19" rack using mounting brackets. Use the following diagrams as a guide. Figure 2-2 Attach mounting brackets to the switch Fasten the mounting brackets to the Switch using the screws provided. With the brackets attached securely, the Switch can be mounted in a standard rack, as shown below. Note: Please review the Installation Guidelines above before installing the Switch in a rack. Make sure there is adequate space around the Switch to allow for proper air flow, ventilation and cooling. 24