D-Link DGS-3620-52T-SE-LIC Product Manual - Page 106
Port Trunking Settings, LACP Port Settings
View all D-Link DGS-3620-52T-SE-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide NOTE: If any ports within the trunk group become disconnected, packets intended for the disconnected port will be load shared among the other linked ports of the link aggregation group. Port Trunking Settings On this page the user can configure the port trunk settings for the switch. To view the following window, click L2 Features > Link Aggregation > Port Trunking Settings, as show below: Figure 4-42 Port Trunking Settings window The fields that can be configured or displayed are described below: Parameter Description Algorithm This is the traffic hash algorithm among the ports of the link aggregation group. Options to choose from are MAC Source Dest, IP Source Dest and Lay4 Source Dest. Unit Select the unit you want to configure. Group ID (1-32) Select an ID number for the group, between 1 and 32. Type This drop-down menu allows users to select between Static and LACP (Link Aggregation Control Protocol). LACP allows for the automatic detection of links in a Port Trunking Group. Master Port Choose the Master Port for the trunk group using the drop-down menu. State Use the drop-down menu to toggle between Enabled and Disabled. This is used to turn a port trunking group on or off. This is useful for diagnostics, to quickly isolate a bandwidth intensive network device or to have an absolute backup aggregation group that is not under automatic control. Member Ports Choose the members of a trunked group. Up to eight ports can be assigned to a group. Active Ports Shows the ports that are currently forwarding packets. Click the Apply button to accept the changes made. Click the Clear All button to clear out all the information entered. Click the Add button to add a new entry based on the information entered. NOTE: The maximum number of ports that can be configured in one Static Trunk or LACP Group are 8 ports. LACP Port Settings In conjunction with the Trunking window, users can create port trunking groups on the Switch. Using the following window, the user may set which ports will be active and passive in processing and sending LACP control frames. 96