D-Link DGS-3620-52T-SE-LIC Product Manual - Page 246
BGP Peer Group Settings, L3 Features > BGP > BGP Peer Group Settings
View all D-Link DGS-3620-52T-SE-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Parameter Description Dampening State Use the drop-down menu to enable or disable the BGP dampening function's state. Half Life (1-45) Enter the time (in minutes) after which the penalty of the reachable routes will be down, by half. The default setting is 15 minutes. Reuse (1-20000) Enter a reuse value. If the penalty for a flapping route decreases enough to fall below this value, the route is unsuppressed. The default setting is 750. Suppress (1-20000) Enter a suppress value. A route is suppressed when its penalty exceeds this limit. The default setting is 2000. Max Suppress Time (1-255) Enter the maximum time (in minutes) a route can be suppressed. The default setting is 60 minutes. Un Reachability Half Life (1-45) Enter the time (in minutes) after which the penalty of the unreachable routes will be down, by half. The default setting is 15 minutes. Route Map Action Use the drop-down menu to select between Route Map and Clear Route Map. Route Map sets the dampening running configuration while Clear Route Map withdraws the route map configuration. Route Map Name Enter a route map name to be set or withdrawn. The default value is null. Action Use the drop-down menu to clear the IP or Network address route dampening information stored in the routing table. IP Address Enter an IPv4 address to clear the dampening information. Netmask Enter the netmask to clear the dampening information. Click the Apply button to accept the changes made for each individual section. BGP Peer Group Settings This window is used to create or delete a Border Gateway Protocol (BGP) neighbor. To view the following window, click L3 Features > BGP > BGP Peer Group Settings, as shown below: Figure 5-117 BGP Peer Group Settings window The fields that can be configured are described below: Parameter Description Peer Group Name Enter the name of the BGP peer group. Action Choose among None, Add, or Delete. None is the default. IP Address Enter the IP address to be added or deleted. 236