D-Link DS-510S User Guide

D-Link DS-510S Manual

Get D-Link DS-510S PDF manuals and user guides View all D-Link DS-510S manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DS-510S manual content summary:

  • D-Link DS-510S | User Guide - Page 1
    DSL-510 ADSL Router User's Guide DSL-510 ADSL Router User's Guide (First Edition May 2003) i
  • D-Link DS-510S | User Guide - Page 2
    DSL-510 ADSL Router User's Guide FCC Warning This equipment has been tested and found to comply with the radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
  • D-Link DS-510S | User Guide - Page 3
    DSL-510 ADSL Router User's Guide TABLE OF CONTENTS About This User's Guide V Guide Overview ...v Before You Start ...VI Installation Overview ...vi Requirements ...vi Low Pass Filters ...vi Operating System ...vi Web Browser ...vi Ethernet Port (NIC Adapter) ...vii
  • D-Link DS-510S | User Guide - Page 4
    DSL-510 ADSL Router User's Guide Windows 2000 for DHCP ...9 Windows ME for DHCP ...12 Windows 98SE for DHCP ...15 Access the Web Configuration ...18 Using the Configuration Wizard ...19 Using
  • D-Link DS-510S | User Guide - Page 5
    DSL-510 ADSL Router User's Guide Log ...67 Traffic ...68 ATM ...69 TCP ...70 ADSL ...71 Appendix A - Technical Specifications 72 Appendix B - Microfilters and Splitters 73 In-Line Filters ...73 Line Splitter ...74 iv
  • D-Link DS-510S | User Guide - Page 6
    About This User's Guide This user's guide provides instructions on how to install the DSL-510 ADSL Router and use it to connect a computer or Ethernet LAN to the Internet. If you are using a computer with a functioning Ethernet port, you can use the Quick Installation Guide to quickly establish
  • D-Link DS-510S | User Guide - Page 7
    DSL-510 ADSL Router User's Guide Before You Start Please read and make sure you understand a web browser. You may also need to use information given to you by your ISP or ADSL service provider. This information is stored in the Router memory and used to establish the ADSL connection and confirm
  • D-Link DS-510S | User Guide - Page 8
    510 ADSL Router User's Guide adapter, follow the installation instructions that come with the Ethernet NIC adapter. Router vs. Bridge Mode The DSL-510 can be used in four the Internet (through computers operated by your ISP or service provider). Additional software must be installed if you are using
  • D-Link DS-510S | User Guide - Page 9
    have: 1. One DSL-510 ADSL Router 2. One CD-ROM with this User's Guide and the Quick Installation Guide 3. One twisted-pair telephone cable used for ADSL connection 4. One CAT-5 Ethernet cable. 5. One AC power adapter suitable for your electric service. 6. One Quick Installation Guide hardcopy. viii
  • D-Link DS-510S | User Guide - Page 10
    Guide Chapter 1 - Introduction ADSL modem technology is a relatively new technology and may be unfamiliar to the reader. In this section, we introduce you to ADSL technology and give a brief description of its key attributes. We also give a general description of the D-Link DSL-510 dedicated service
  • D-Link DS-510S | User Guide - Page 11
    DSL-510 ADSL Router User's Guide Front Panel Place the Router in a location where the LED indicators can be easily viewed. The LED Indicators read as follows: Power Steady green light indicates the unit is powered on. Status Blinking green indicates normal operation. Ethernet: Link/ Act
  • D-Link DS-510S | User Guide - Page 12
    DSL-510 ADSL Router User's Guide Chapter 2 - Hardware Installation In this chapter you will you can monitor the LED indicators. Allow some space above the Router for ventilation to avoid problems with overheating. Connect the ADSL Line Use the twisted-pair ADSL cable (standard telephone cable)
  • D-Link DS-510S | User Guide - Page 13
    DSL-510 ADSL Router User's Guide Hub or Switch to Router Connection Connect the Router to an the other MDI-X ports (1x, 2x, etc.) with a cross-wired cable or use crossover adapter. DSL-510 Power On Router To power on the device: 1. Insert the AC Power Adapter cord into the power receptacle
  • D-Link DS-510S | User Guide - Page 14
    DSL-510 ADSL Router User's Guide ADSL service. It is also possible that you must change the PVC settings used for the ADSL connection. Your service provider the TCP/IP protocol has been installed, if it is not instruction are provided for installing it. Once the protocol has been installed
  • D-Link DS-510S | User Guide - Page 15
    DSL-510 ADSL Router User's Guide Windows XP for DHCP 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network
  • D-Link DS-510S | User Guide - Page 16
    DSL-510 ADSL Router User's Guide 4. In the General tab of the Local Area Connection Properties menu. Highlight Internet Protocol (TCP/IP) under "This connection uses the following items." by click
  • D-Link DS-510S | User Guide - Page 17
    DSL-510 ADSL Router User's Guide 6. The Local Area Connection Properties window appears. Click OK button. Your computer is now ready to use the ADSL Router DHCP server. 8
  • D-Link DS-510S | User Guide - Page 18
    DSL-510 ADSL Router User's Guide Windows 2000 for DHCP 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network
  • D-Link DS-510S | User Guide - Page 19
    DSL-510 ADSL Router User's Guide 4. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click Properties. 5. Select "Obtain an IP address automatically" by clicking
  • D-Link DS-510S | User Guide - Page 20
    DSL-510 ADSL Router User's Guide 6. The General tab will again appear. Click OK button. Your computer is now ready to use the ADSL Router DHCP server. 11
  • D-Link DS-510S | User Guide - Page 21
    DSL-510 ADSL Router User's Guide Windows ME for DHCP 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network icon. 12
  • D-Link DS-510S | User Guide - Page 22
    DSL-510 ADSL Router User's Guide 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with your network card/adapter. and then
  • D-Link DS-510S | User Guide - Page 23
    DSL-510 ADSL Router User's Guide 5. The Network window again appears, click OK button. Your computer is now ready to use the ADSL Router DHCP server. 14
  • D-Link DS-510S | User Guide - Page 24
    DSL-510 ADSL Router User's Guide Windows 98SE for DHCP 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network icon. 15
  • D-Link DS-510S | User Guide - Page 25
    DSL-510 ADSL Router User's Guide 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with your network card/adapter and then
  • D-Link DS-510S | User Guide - Page 26
    DSL-510 ADSL Router User's Guide 5. The Network window again appears, click OK button. 6. The System Settings Change window appears. You need to restart your computer for the changes to go into effect. Click Yes. 17
  • D-Link DS-510S | User Guide - Page 27
    DSL-510 ADSL Router User's Guide Access the Web Configuration Manager Once the computer has IP settings that allow it to access the web-based configuration manager with the ADSL account user name and password needed for PPP connections to access the ADSL or network service provider's network. 18
  • D-Link DS-510S | User Guide - Page 28
    DSL-510 ADSL Router User's Guide Using the Configuration Wizard Check your IP supplier information. If you are unsure of which setting to select, please contact your Internet Service Provider. 1. Once you have logged in, the Home screen will appear. Click Run Wizard button. 2. The Setup Wizard
  • D-Link DS-510S | User Guide - Page 29
    DSL-510 ADSL Router User's Guide 3. Set up your new password. It is recommended that you requires the use of PPPoE/PPPoA to connect to connect to their services. Please see PPPoE/PPPoA section. Bridge Mode: Select this option to manually input the IP address that your ISP assigned to you. Please see
  • D-Link DS-510S | User Guide - Page 30
    DSL-510 ADSL Router User's Guide Dynamic IP Address If your selected Dynamic IP Address, you will see the following page. You will need to enter in VPI, VCI and select
  • D-Link DS-510S | User Guide - Page 31
    DSL-510 ADSL Router User's Guide PPPoE/PPPoA If your selected PPPoE/PPPoA, you will see the following page. Enter in the Use Name, Password, VPI, VCI and select your connection
  • D-Link DS-510S | User Guide - Page 32
    DSL-510 ADSL Router User's Guide 5. At this point, the Setup Wizard has completed. Click Restart to save the settings and reboot the DSL-510. 6. The DSL-510 will save the changes and reboot. Click Close button to close out the Setup Wizard screen. You setup of the DSL-510 is now complete. You should
  • D-Link DS-510S | User Guide - Page 33
    DSL-510 ADSL Router User's Guide Configuring IP When Setting Your Computer If you connection type as Dynamic IP Address, Static IP Address and PPPoE/PPPoA, Don't care configuring IP setting
  • D-Link DS-510S | User Guide - Page 34
    DSL-510 ADSL Router User's Guide 3. In the LAN or High-Speed Internet window, right-click on icon corresponding to your network interface card (NIC) and select Properties. (This icon may
  • D-Link DS-510S | User Guide - Page 35
    DSL-510 ADSL Router User's Guide 5. The Internet Protocol (TCP/IP) Properties window appears. Under the General tab, select Use the following IP address:, enter the IP address, Subnet Mask, and Default Gateway given to you by your ISP or ADSL service provider, then select Use the following DNS
  • D-Link DS-510S | User Guide - Page 36
    DSL-510 ADSL Router User's Guide Windows 2000 IP Setting for Bridge Mode 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-
  • D-Link DS-510S | User Guide - Page 37
    DSL-510 ADSL Router User's Guide 4. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP Subnet Mask, and Default Gateway given to you by your ISP or ADSL service provider, then select Use the following DNS server addresses:, enter the DNS settings given to you by your
  • D-Link DS-510S | User Guide - Page 38
    DSL-510 ADSL Router User's Guide 6. The General tab will again appear. Click OK button. 7. The Local Network window appears. You need to restart your computer for the changes to go into effect. Click Yes. 29
  • D-Link DS-510S | User Guide - Page 39
    DSL-510 ADSL Router User's Guide Windows ME IP Setting for Bridge Mode 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network icon. 30
  • D-Link DS-510S | User Guide - Page 40
    DSL-510 ADSL Router User's Guide 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with your network Select an IP address option. Enter the IP Address and Subnet Mask settings given to you by your ISP or ADSL service provider. 31
  • D-Link DS-510S | User Guide - Page 41
    DSL-510 ADSL Router User's Guide 5. Select Gateway tab and enter the IP settings in the New gateway field. Click Add. 6. Select the DNS Configuration tab. Select the Enable DNS option. 7. Type in your host name in the Host: field. 8. Type in your domain name in the Domain: field. 32
  • D-Link DS-510S | User Guide - Page 42
    DSL-510 ADSL Router User's Guide 9. Enter the DNS settings in the DNS Server Order field and click Add. If you have more than one DNS IP address, repeat this step. You can have up to 3 DNS servers listed here. 10. After all the TCP/IP information has been entered, click OK. 33
  • D-Link DS-510S | User Guide - Page 43
    DSL-510 ADSL Router User's Guide 11. The Network window again appears, click OK button. 14. The System Settings Change window appears. You need to restart your computer for the changes to go into effect. Click Yes. 34
  • D-Link DS-510S | User Guide - Page 44
    DSL-510 ADSL Router User's Guide Windows 98SE IP Setting for Bridge Mode 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network icon. 35
  • D-Link DS-510S | User Guide - Page 45
    DSL-510 ADSL Router User's Guide 3. In the Network windows appears. Select the Configuration tab, select TCP/IP protocol line that has been associated with your network Select an IP address option. Enter the IP Address and Subnet Mask settings given to you by your ISP or ADSL service provider. 36
  • D-Link DS-510S | User Guide - Page 46
    DSL-510 ADSL Router User's Guide 5. Select Gateway tab and enter the IP settings in the New gateway field. Click Add. 6. Select the DNS Configuration tab. Select the Enable DNS option. 7. Type in your host name in the Host: field. 8. Type in your domain name in the Domain: field. 37
  • D-Link DS-510S | User Guide - Page 47
    DSL-510 ADSL Router User's Guide 9. Enter the DNS settings in the DNS Server Order field and click Add. If you have more than one DNS IP address, repeat this step. You can have up to 3 DNS servers listed here. 10. After all the TCP/IP information has been entered, click OK. 38
  • D-Link DS-510S | User Guide - Page 48
    DSL-510 ADSL Router User's Guide 11. The Network window again appears, click OK button. 12. The System Settings Change window appears. You need to restart your computer for the changes to go into effect. Click Yes. 39
  • D-Link DS-510S | User Guide - Page 49
    DSL-510 ADSL Router User's Guide Chapter 4 - Web-based Configuration This chapter describes how to -based management interface. The Setup Wizard is a utility used to quickly configure the DSL-510. It will guide you through for quick and basic steps to help you connect to your ISP. You will be
  • D-Link DS-510S | User Guide - Page 50
    510 ADSL Router User's Guide Type: Change connection method and packet encapsulation technique as instructed by your ISP. The available connection types are 1483 Bridge address unless required by your ISP. ATM Service Category: UBR and CBR are supported form the ATM. Bandwidth: Bandwidth setting
  • D-Link DS-510S | User Guide - Page 51
    510 ADSL Router User's Guide Type: Change connection method and packet encapsulation technique as instructed by your ISP. The available connection types are 1483 DNS Server address provided by your ISP. ATM Service Category: UBR and CBR are supported form the ATM. Bandwidth: Bandwidth setting takes
  • D-Link DS-510S | User Guide - Page 52
    510 ADSL Router User's Guide Home＞WAN＞PPPoE/PPPoA Choose PPPoE/PPPoA if you're ISP uses PPPoE/PPPoA connection. Your ISP will provide you with a username, password, VPI, VCI and select connection type. This option is typically used for DSL service instructed Service Category: UBR and CBR are supported
  • D-Link DS-510S | User Guide - Page 53
    DSL-510 ADSL Router User's Guide 44
  • D-Link DS-510S | User Guide - Page 54
    510 ADSL Router User's Guide Home＞WAN＞Bridge Mode Choose Bridge Mode if all WAN IP information is provided to you by your ISP. You will need to enter in the VPI, VCI and select connection type provided to you by your ISP. VPI: If instructed . ATM Service Category: UBR and CBR are supported form the
  • D-Link DS-510S | User Guide - Page 55
    DSL-510 ADSL Router User's Guide LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DSL-510. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP
  • D-Link DS-510S | User Guide - Page 56
    510 ADSL Router User's Guide DHCP DHCP stands for Dynamic Host Control Protocol. The DSL-510 : Click Enable to turn on the DNS forwarding service, which forwards to your LAN PCs the Domain If you click Disable, you must configure DNS addresses manually on each PC or in the fields below. Starting IP
  • D-Link DS-510S | User Guide - Page 57
    DSL-510 ADSL Router User's Guide DNS The DNS Configuration page allows the user to set the configuration of DNS proxy. DNS proxy selection: (1) Disable DNS Proxy: The LAN port does
  • D-Link DS-510S | User Guide - Page 58
    ADSL Router User's Guide Advanced Virtual Server The DSL-510 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN network. The DSL-510 firewall feature filters out unrecognized
  • D-Link DS-510S | User Guide - Page 59
    ADSL Router User's Guide Filters Filters are used to deny LAN computers from accessing the Internet. The Router can be setup to deny internal computers by their IP or MAC addresses. The DSL-510 can also block users from accessing restricted web sites. Advanced＞Filters＞Outbound Filters-Outbound: Use
  • D-Link DS-510S | User Guide - Page 60
    DSL-510 ADSL Router User's Guide Advanced＞Filters＞Inbound Filters-Inbound: Use IP Inbound Filters to deny WAN IP addresses from accessing the internal network. You can deny specific port numbers
  • D-Link DS-510S | User Guide - Page 61
    DSL-510 ADSL Router User's Guide Schedule This is the schedule of time when the IP Filter will be enabled. Schedule Name: defines the name of this time schedule. Schedule: drop
  • D-Link DS-510S | User Guide - Page 62
    DSL-510 ADSL Router User's Guide Routing The Route Table page displays routing table and allows the user to manually enter the routing entry. The routing table will display the routing status of Destination, Netmask, Gateway and Interface. The interface lo0 means the loop back
  • D-Link DS-510S | User Guide - Page 63
    ADSL Router User's Guide DMZ If you have a client PC that cannot run Internet applications properly from behind the DSL-510, then you can set the client up to unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for
  • D-Link DS-510S | User Guide - Page 64
    510. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the Router. DoS Protection: Click the Enable radio button to use the following denial of service crazy things happen. Windows also sometimes has trouble handling anything on a network at all
  • D-Link DS-510S | User Guide - Page 65
    DSL-510 ADSL Router User's Guide RIP The RIP Configuration page allows the user to set the configuration for the system wide configuration of RIP. The actual RIP configuration is in
  • D-Link DS-510S | User Guide - Page 66
    DSL-510 ADSL Router User's Guide Advanced＞RIP＞Advanced Configuration Interface: This field allows the user to choose the Interface (PVCs, PPP Sessions and LAN), for the RIP to be configured.
  • D-Link DS-510S | User Guide - Page 67
    DSL-510 ADSL Router User's Guide PPP PPP is configured as a group of software settings associated with the ADSL port. Although the device has only one physical ADSL port, the Router
  • D-Link DS-510S | User Guide - Page 68
    DSL-510 ADSL Router User's Guide Advanced＞PPP＞PPP Account Configuration User Name: The name you use to log in to your ISP each time this PPP connection is established. Password:
  • D-Link DS-510S | User Guide - Page 69
    statistics of the DSL-510.The DSL-510 supports SNMP v1, v2. System Name: The name referencing the virtual service. System Location：The physical allow "Read only" access to network administration using SNMP. You can view the network, but no configuration is possible with this setting. Set Community
  • D-Link DS-510S | User Guide - Page 70
    ADSL Router User's Guide Tools Admin At this page, the DSL-510 administrator can change the system password. time for confirmation. Time The system time is the time used by the DSL-510 for scheduling services. You can manually set the time or connect to a NTP (Network Time Protocol) server. If an
  • D-Link DS-510S | User Guide - Page 71
    DSL-510 ADSL Router User's Guide System The current system settings can be saved as a file onto the local hard drive. The saved file or any to browse the local hard driver and locate the firmware to be used for the update. Please check the D-Link support site for firmware updates at D-Link Technical
  • D-Link DS-510S | User Guide - Page 72
    DSL-510 firmware by logging onto the D-Link web site at D-Link Technical support website of your country. The Update Firmware window lists the version of the firmware the Router is currently using. If you would like to update, follow the instructions given on the firmware update page to download the
  • D-Link DS-510S | User Guide - Page 73
    DSL-510 ADSL Router User's Guide 3. Choice the file (FIRMWARE.DLF). 4. Click Apply button. 64
  • D-Link DS-510S | User Guide - Page 74
    DSL-510 ADSL Router User's Guide 5. Power Off the ADSL Router about 30 seconds, then Power On. Misc. These are additional tools and features of the ADSL Router. Ping Test: This
  • D-Link DS-510S | User Guide - Page 75
    DSL-510 ADSL Router User's Guide Diagnostic This useful diagnostic utility can be used to check if a computer is on the Internet. It sends ping packets and listens for replies from the specific host. 66
  • D-Link DS-510S | User Guide - Page 76
    ADSL Router User's Guide Status Device Info This page displays the current information for the ADSL Router. It will display the WAN, LAN, information. This page allows you to observe the DSL-510 working status: Log The ADSL Router keeps a running log of events and activities occurring on the ADSL
  • D-Link DS-510S | User Guide - Page 77
    DSL-510 ADSL Router User's Guide Traffic The ADSL Router keeps a statistic of traffic that passes through it. You are able to view the amount of packets that passes through the ADSL Router on both the WAN port and the LAN port. The traffic counter will reset if the device is rebooted. 68
  • D-Link DS-510S | User Guide - Page 78
    DSL-510 ADSL Router User's Guide ATM The ATM Status page shows all the statistics information of ATM cells. Tx Bytes: Total Good Bytes TX's Rx Bytes: Total Good Bytes Received
  • D-Link DS-510S | User Guide - Page 79
    DSL-510 ADSL Router User's Guide TCP The TCP Status page shows the statistics for all TCP connections. Total Packets Sent; Data Packets Sent; Data Bytes Sent; Total Packets Received; Packets
  • D-Link DS-510S | User Guide - Page 80
    DSL-510 ADSL Router User's Guide ADSL Showtime Firmware Version: This field displays the D-Link ADSL data pump firmware version number. ADSL Line Status: This field displays the ADSL connection process
  • D-Link DS-510S | User Guide - Page 81
    DSL-510 ADSL Router User's Guide Appendix A - Technical Specifications General Standards: ANSI T1.413 issue 2 ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) Protocol: Data Transfer Rate: Media Interface Exchange: RFC 1483 Multiprotocol
  • D-Link DS-510S | User Guide - Page 82
    510 ADSL Router User's Guide Appendix B - Microfilters and Splitters Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services filter device. Follow the instructions given to you by your ADSL service provider, ISP or
  • D-Link DS-510S | User Guide - Page 83
    DSL-510 ADSL Router User's Guide Line Splitter If you are instructed to use a "line splitter", you must install the device between the Router and the phone jack. Use standard telephone cable with standard RJ-11 connectors.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
DSL-510
ADSL Router
User’s Guide
(First Edition May 2003)