D-Link DSL-321B User Manual - Page 22
PPPoE/PPPoA
View all D-Link DSL-321B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Section 3 - Configuration PPPoE/PPPoA To configure a PPPoE or PPPoA type WAN connection, follow these steps: 1. Type the Username and Password used for your ADSL account. A typical User Name will be in the form "[email protected]." The Password may be assigned to you by your ISP or you may have selected it when you set up the account with your ISP. The Service Name field is used for the name of your Internet Service Provider. This is optional. 2. Choose the Connection Type from the drop-down menu. This defines both the connection protocol and encapsulation method used for your ADSL service. The available options are PPPoE LLC, PPPoE VC-Mux, PPPoA LLC and PPPoA VC-Mux. If you have not been provided specific information for the Connection Type setting, leave the default setting. 3. Leave the MTU value at the default setting unless you have specific reasons to change this. 4. Some users will want to set an Idle Time Out. This is an age-out value, in minutes, before the Modem times out. 5. If you are instructed to change the VPI or VCI values, type in the values assigned for your account. 6. When you are satisfied that all the WAN settings are configured correctly, click the Apply Settings button. This will save the settings and reboot the Modem to let your changes take effect. 7. Upon restarting, the Modem should automatically establish the WAN connection. If it does not, click the Connect button at the bottom of this window. D-Link DSL-321B User Manual 22