D-Link DSL-520B Product Manual - Page 30
PPP over Ethernet PPPoE - d link default password
UPC - 790069340185
View all D-Link DSL-520B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Section 9 - Advanced Setup PPP over Ethernet (PPPoE) This page allows you to configure your PPPoE connection. PPP Username: Enter your username as provided by your ISP. PPP Password: Enter your password as provided by your ISP. PPP Service Name: Enter any name that will help you identify your connection. This field will not affect your connection. Dial on demand (with idle timeout timer): Allows you to manually connect to the Internet so you are not permanently connected. Idle timeout timer is included. PPP IP extension: Used by some ISPs. Check with your ISP to see if it is required. Use Static IP Address: Select if your ISP has provided you with a static IP address. If selected, you will be asked to enter the static IP address. Retry PPP password on authentication error: Select if you want the router to automatically retry your PPP username and password when there is an authentication error on your DSL line. Enable PPP Debug Mode: Select if you want to keep a log of connection negotiation transactions. This option is used for troubleshooting connection issues. Bridge PPPoE Frames Between WAN and Local Ports (Default Enabled): Use the default setting unless otherwise instructed by your ISP. MTU: Use the default setting of 1492 unless otherwise instructed by your ISP. Click Next. D-Link DSL-520B ADSL2+ Modem User Manual 30