D-Link DSN-6210 User Manual - Page 63
RAID Groups, Total GB or
View all D-Link DSN-6210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
D-Link Document - User Manual 2. If there is any RAID group which is in protected RAID level and can be set with a dedicated spare disk, select one RAID group, and then click OK button. TIP: For DSN-6200/6500Series, the maximum number of physical drives in a system is 256. RAID Groups The RAID Groups tab is provided to create, modify, delete, or view the status of the RAID groups. Use the drop-down list at the top to change the drive size units (MB or GB). Select the traditional RAID group, the following will be displayed. This table shows the column descriptions. Column Name Name Total (GB) or (MB) Free Capacity (GB) or (MB) Available Size (GB) or (MB) Thin Provisioning Disks Uses Number of Virtual Disk Status Description RAID group name. Total capacity of the RAID group. The unit can be displayed in GB or MB. Free capacity of the RAID group. The unit can be displayed in GB or MB. Available capacity of the RAID group. The unit can be displayed in GB or MB. The status of Thin provisioning: Disabled. Enabled. The number of physical disks in the RAID group. The number of virtual disks in the RAID group. The status of the RAID group: Online: the RAID group is online. Offline: the RAID group is offline. Copyright@2014 D-Link System, Inc. All Rights Reserved. 63