D-Link DWL-3140AP User Manual
D-Link DWL-3140AP - Web Smart PoE Thin Access Point Manual
 |
UPC - 790069307010
View all D-Link DWL-3140AP manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DWL-3140AP manual content summary:
- D-Link DWL-3140AP | User Manual - Page 1
May 2007 Version 1.00 - D-Link DWL-3140AP | User Manual - Page 2
Global Setting ...14 Default Parameters ...15 Mail Alert ...15 Syslog ...16 Modifying the Device Password ...17 Modifying the Device System Key...18 Backup the Database...18 Restore the Database ...18 Searching the Switch ...19 Configure the Wireless System...20 Configure the Wireless Switch ...20 - D-Link DWL-3140AP | User Manual - Page 3
...36 Monitoring Summary ...36 AP Status and Trouble Shooting...37 UtilizationÆAP Users...39 UtilizationÆAP Traffic ...40 UtilizationÆClient Info...41 UtilizationÆLoad Balance ...42 Firmware Upgrade ...43 Log ...44 APPENDIX ...45 Cold Start the AP: ...45 Factory reset ...46 D-Link Corporation 3 - D-Link DWL-3140AP | User Manual - Page 4
With Smart WLAN Manager there is no need to configure the D-Link DWL-3140AP Wireless Access Points individually. System Requirement Suggested Specifications for Smart WLAN Manager installation: ‧ A PC or Notebook with an installed network adapter ‧ Supported OS: Windows® 2000 or XP ‧ DHCP server is - D-Link DWL-3140AP | User Manual - Page 5
D-Link Smart WLAN Manager User Manual Installing the Smart WLAN Manager Please do following steps to install the Smart WLAN Manager: Step 1. Insert the CD and execute the "setup.exe" program. The InstallShield Wizard will appear D-Link Corporation 5 - D-Link DWL-3140AP | User Manual - Page 6
D-Link Smart WLAN Manager User Manual Step 2. Choose the destination folder where you want to install the program to and click "Next". D-Link Corporation 6 - D-Link DWL-3140AP | User Manual - Page 7
D-Link Smart WLAN Manager User Manual Step 3. The program will perform the installation automatically. D-Link Corporation 7 - D-Link DWL-3140AP | User Manual - Page 8
D-Link Smart WLAN Manager User Manual Step 4. Click "Finish" to complete the installation. D-Link Corporation 8 - D-Link DWL-3140AP | User Manual - Page 9
Smart WLAN Manager User Manual Discovering the Switch and AP To launch the Smart WLAN Manager: • Go to the Start Menu • Select Programs • Select D-Link Smart WLAN Manager The D-Link Smart WLAN Manager will appear. Click "OK" (There's no default password) to continue. Choose ToolsÆSwitch Discover - D-Link DWL-3140AP | User Manual - Page 10
User Manual Launch the web browser on your PC, and connect the switch by the IP address found (default password: admin). Make sure the firmware version of DES-1228P is at least 1.20.03. Make sure the SNMP read_write community is "private" (default value) and enable the function. D-Link Corporation - D-Link DWL-3140AP | User Manual - Page 11
the AP into the database. The Status of the AP will change from "New" to "Online" after being added to the database. Note: For detailed connection configuration, please also refer to the Configuration Guide. D-Link Corporation 11 - D-Link DWL-3140AP | User Manual - Page 12
D-Link Smart WLAN Manager User Manual Using the Smart WLAN Manager Understanding the Screen Layout ○1 Menu Bar 1. Menu Bar 2. Standard Bar 3. Function the options of View in the menu bar. ○2 Standard Bar ○4 Database Columns D-Link Corporation ○5 Status Columns ○6 Output Bar i Status Bar 12 - D-Link DWL-3140AP | User Manual - Page 13
- The discovery password needs to be consistent with the SNMP read_write community name Input IP - Enter the IP address of the switch. User can either input a specific IP address (fill in "From IP"), or a range of IP addresses (fill in both "From IP" and "To IP") Polling Information By default the - D-Link DWL-3140AP | User Manual - Page 14
D-Link Smart WLAN Manager User Manual Clear Database Click the Clear Database icon or choose SystemÆ the log levels. Interval - The time needed to wait for the next polling. The range is from 10 to 6000 seconds, and default value is 60. TimeOut - The waiting time for the device to respond, in which - D-Link DWL-3140AP | User Manual - Page 15
D-Link Smart WLAN Manager User Manual Default Parameters In Default Params, users can configure the SSID and security to specific managed AP, or to create a default profile for all new devices by checking the option. Mail Alert In Mail alert, users can configure when an event happens, and a log - D-Link DWL-3140AP | User Manual - Page 16
User Manual Syslog In Syslog, users are allowed to set the IP address of the syslog server, the level of events to be sent to the syslog server, and when to send out the message. The default setting for logs to be recorded are all types (Critical, Warning, Info, and Debug). D-Link Corporation - D-Link DWL-3140AP | User Manual - Page 17
D-Link Smart WLAN Manager User Manual Modifying the Device Password Click the Device Password Manager icon or choose ToolsÆPassword Manager to modify the device password. Users can either change the password individually by selecting the device and clicking "Modify single", or change all devices at - D-Link DWL-3140AP | User Manual - Page 18
D-Link Smart WLAN Manager User Manual Modifying the Device System Key Click the Modify All Device System Key icon or choose ToolsÆSystem Key Manager to modify the device system key. User can assign the system key to examine the validity of the access point. Once the key is configured, it needs to be - D-Link DWL-3140AP | User Manual - Page 19
Link Smart WLAN Manager User Manual Searching the Switch Click the Switch Discovery Utility icon or choose ToolsÆSwitch Discovery Wizard to search the available switch. The Discovery List window shows the following information of the switch available: MAC Address - The MAC address of the switch. IP - D-Link DWL-3140AP | User Manual - Page 20
D-Link Smart WLAN Manager User Manual Configure the Wireless System Configure the Wireless Switch In MonitorÆAP, choose the view by Tree or topology, and double click the wireless switch you want to change the setting, and the configuration window will pop up. System Configuration IP Address - Users - D-Link DWL-3140AP | User Manual - Page 21
is enabled on a port, the switch will check the AP with the system key to determine if it will be authenticated or denied. Port Mapping Configuration It shows the ports that access points connect to, and their IP addresses. D-Link Corporation 21 - D-Link DWL-3140AP | User Manual - Page 22
. When the static IP was selected, please manually input the IP Address, Subnet Mask and Gateway IP. Name - User can input the system name for the access point. Connection Limit - Maximum number of clients can be connected. Default value is 60. Management Host - Configure the IP address of the Smart - D-Link DWL-3140AP | User Manual - Page 23
Manager User Manual Wireless Configuration B/G Mode - Select if you want to include both 802.11b and 11g devices (Mixed), or only 802.11b (B_only), or 802.11g (G_only) device on the network. Wireless Radio - Select to turn the radio wave On or Off. Wireless Network Name (SSID) - The Service Set - D-Link DWL-3140AP | User Manual - Page 24
D-Link Smart WLAN Manager User Manual WPA2 If you select WEP as the security type, additional columns will appear with the following options. Authentication - Select Open System or Shared Key to be used on the network. WEP Encryption - Select the key size (64-bit, 128-bit, or 152-bit). Default Key - - D-Link DWL-3140AP | User Manual - Page 25
, and the secret of the Radius server 1 Radius Server 2 - Enter the IP address, port used, and the secret of the Radius server 2 Advanced Configuration Transmit Data Rates - Select the maximum wireless signal rate of the AP. Default is Auto. Transmit Power - Select the transmit power of the AP - D-Link DWL-3140AP | User Manual - Page 26
D-Link Smart WLAN Manager User Manual Mac Filter Configuration MAC Address - Add MAC addresses to the MAC Address Control List. Select an entry on the Address Control List and click Delete if you want to remove that Mac address. Disable MAC Filters - Not filtering based on the Mac addresses. Accept - D-Link DWL-3140AP | User Manual - Page 27
D-Link Smart WLAN Manager User Manual Configure the Access Point by Group In Group, users can configure a group template for multiple access points' use. Create a Group Template Click the "Add Group" icon ( ) and a window will appear: Enter the group name and choose which APs you want - D-Link DWL-3140AP | User Manual - Page 28
User Manual In the Wireless tab, you can choose if want to enable the Load Balance function, and other options. When configuring load balance, SSID, User Number Limit, Security, and MAC Filter must be specified as well. When the load balance is enabled, and once the number of clients are connected - D-Link DWL-3140AP | User Manual - Page 29
D-Link Smart WLAN Manager User Manual Edit a Group Template Click the "Configure Group Template" icon ( ) and an edit window will appear: Note: For a detailed explanation on Wireless, Advanced, and MAC Filter functions, please refer to section 3.2.2 through 3.2.4. - D-Link DWL-3140AP | User Manual - Page 30
D-Link Smart WLAN Manager User Manual Delete AP/Template: If you want to remove an AP from the group, or delete a template, just select the AP or template (the entry will be highlighted in gray), and click the "Delete Group/AP" icon ( ); a warning message will appear. Or Show AP Configuration: Click - D-Link DWL-3140AP | User Manual - Page 31
AP only. 4. Configuration ( ): Users can view or modify the selected AP's configuration 5. AP Connection ( ): It will redirect users to the selected AP's Utilization page. 6. Reload Previous Configuration ( ): Allows users to reverse the AP to the previous configuration. D-Link Corporation 31 - D-Link DWL-3140AP | User Manual - Page 32
D-Link Smart WLAN Manager User Manual 7. Save to Database ( ): To add a newly found AP to the database. 8. Delete from Database ( ): To delete an AP from the database. 9. Customize ( ): Users can change the view by adding/deleting attributes according to their needs. 10. Replace: Right click the - D-Link DWL-3140AP | User Manual - Page 33
D-Link Smart WLAN Manager User Manual Monitoring AP and Wireless Switch by Tree View by Tree, lists down the wireless switch and the access points connected to it in the database column. The information displayed includes System Name, Mac address, IP address, and the physical port in which the AP - D-Link DWL-3140AP | User Manual - Page 34
previous configuration. 3. Save to Database ( ): To add a newly found AP to the database. 4. Delete from Database ( ): To delete an AP from the database. 5. Save Topology Position ( ): To reserve the location, the user must set the AP and wireless switch; otherwise it will return to the default when - D-Link DWL-3140AP | User Manual - Page 35
D-Link Smart WLAN Manager User Manual 8. Load Map ( ): Import the picture file as the floor plan file. The file types supported are BMP, DIB, EMF, GIF, ICO, JPG, and WMF. 9. Remove Map ( ): Remove the current floor plan. 10. Modify Map ( ): Users can resize the picture by - D-Link DWL-3140AP | User Manual - Page 36
D-Link Smart WLAN Manager User Manual Monitoring Clients In MonitorÆClient, users can see the status of wireless clients connected. The following options are provided: 1. Filter Type: Users can enable the filter to narrow down the database display using various attributes 2. Filter: After the Filter - D-Link DWL-3140AP | User Manual - Page 37
of the connected switch and ensure the switch is online. 2. Cold start the AP from the switch webpage. 3. Cold start the AP detached from the wire reconnected to the switch. 4. Factory reset. An existing AP was replaced by a new AP. You can reverse the AP to the previous configuration, or save - D-Link DWL-3140AP | User Manual - Page 38
key. 3. Disable the anti rouge function from the switch. 4. Factory reset the AP and switch. WLAN Manager can discover the AP successfully but cannot get configuration from the AP correctly. Possible problems: 1. Password error; Delete the troubled AP and run the discovery wizard to find the AP - D-Link DWL-3140AP | User Manual - Page 39
D-Link Smart WLAN Manager User Manual UtilizationÆAP Users This allows users to see the connected client numbers of an access point. You can select the display type by Hour, Day, or Week. The supported file format for exporting includes CSV and PDF. D-Link Corporation 39 - D-Link DWL-3140AP | User Manual - Page 40
D-Link Smart WLAN Manager User Manual UtilizationÆAP Traffic This allows users to see the traffic volume of an access point in bytes. You can select the display type by Hour, Day, or Week. The supported file format for exporting includes CSV and PDF. D-Link Corporation 40 - D-Link DWL-3140AP | User Manual - Page 41
D-Link Smart WLAN Manager User Manual UtilizationÆClient Info. This allows users to see the status history of a wireless client. The supported file format for exporting is CSV. D-Link Corporation 41 - D-Link DWL-3140AP | User Manual - Page 42
D-Link Smart WLAN Manager User Manual UtilizationÆLoad Balance This allows users to see the status of a load balance group. You can select the display type by Hour, Day, or Week. The supported file format for exporting is CSV. D-Link Corporation 42 - D-Link DWL-3140AP | User Manual - Page 43
D-Link Smart WLAN Manager User Manual Firmware Upgrade The Smart WLAN Manager allows users to upgrade multiple devices' firmware all at once. To select a single device, just click on the device you want to select. To select multiple devices, hold down the Ctrl key while clicking on each additional - D-Link DWL-3140AP | User Manual - Page 44
D-Link Smart WLAN Manager User Manual Log The Smart WLAN Manager offers two kinds of logs: Action Log and System Log. Users can save logs by using LogÆ have occurred. Users can choose to display by levels they are interested in. Filtering can be used for System Log as well. D-Link Corporation 44 - D-Link DWL-3140AP | User Manual - Page 45
D-Link Smart WLAN Manager User Manual APPENDIX Cold Start the AP: Please follow the instructions below to cold start your AP from the DES-1228P switch Web UI: 1. Connect to the Switch configuration Web page, and select PoE port Settings. 2. Select the AP connected port at the switch, from port and - D-Link DWL-3140AP | User Manual - Page 46
Manual Factory reset Please follow the 2 steps for factory reset: 1. Reset the DWL-3140 AP to its factory default settings. 2. Restore the other devices on your network to their default settings, by pressing the Reset button on the top of the unit. Please note you will lose the current configuration
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
 |
 |
Version 1.00
May 2007