D-Link DWL-7700AP Product Manual - Page 44

Advanced > Multi-SSID continued

Get D-Link DWL-7700AP - AirPremier Wireless AG Outdoor AP/Bridge PDF manuals and user guides
UPC - 790069272035
View all D-Link DWL-7700AP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

DWL-7700AP User's Manual Advanced > Multi-SSID (continued) Using the Configuration Menu Master SSID: The Master SSID and Security can not be changed here. Those values follow the settings in Home>Wireless. Guest SSID: When you Enable Guest SSID you can name each guest SSID. Security: The Security options for these three Guest SSIDs are Open System or Shared Key. Key Type: Select HEX or ASCII. Key Size: Select 64, 128, or 152-bits Key: Select the 1st through the 4th key to be the active key. Enter key here. VLAN Group ID: If you configure enable Guest access and configure Internal and Guest networks on VLANs, this field will be enabled. Provide a number between 1 and 4094 for the Internal VLAN. This will cause the access point to send DHCP requests with the VLAN tag. The switch and the DHCP server must support VLAN IEEE802.1Q frames. The access point must be able to reach the DHCP server. Check with the Administrator regarding the VLAN and DHCP configurations. Note: Security Setting Limit: When the Primary SSID is set to use one key index for WEP, you can use 3 other key indexes for Guest SSIDs. If the Primary SSID is set to 802.1x, WPA/WPA2-EAP, WPA/WPA2-PSK, WPA-Auto-EAP, or WPA-Auto-PSK, you can only use No Security for guest SSIDs. D-Link Systems, Inc. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
44
DWL-7700AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Advanced > Multi-SSID (continued)
Master SSID:
Guest SSID:
Security:
Key Type:
Key Size:
Key:
VLAN Group ID:
The Master SSID and Security can not be changed here. Those
values follow the settings in Home>Wireless.
When you
Enable Guest SSID
you can name each guest SSID.
The
Security
options for these three Guest SSIDs are Open System
or Shared Key.
Select HEX or ASCII.
Select 64, 128, or 152-bits
Select the 1st through the 4th key to be the active key. Enter key
here.
If you configure enable Guest access and configure Internal and
Guest networks on VLANs, this field will be enabled.
Provide a number between 1 and 4094 for the Internal VLAN.
This will cause the access point to send DHCP requests with the
VLAN tag. The switch and the DHCP server must support VLAN
IEEE802.1Q frames. The access point must be able to reach the
DHCP server.
Check with the Administrator regarding the VLAN and DHCP
configurations.
Note:
Security Setting Limit:
When the Primary SSID is set to use one key index for WEP, you can use 3 other key
indexes for Guest SSIDs.
If the Primary SSID is set to 802.1x, WPA/WPA2-EAP, WPA/WPA2-PSK, WPA-Auto-EAP,
or WPA-Auto-PSK, you can only use
No Security
for guest SSIDs.