D-Link DWL-8600AP Administration Guide - Page 120
Update
View all D-Link DWL-8600AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
D-Link UAP Software User Manual 12/10/09 8. Click Update to update the AP with the new settings. RADIO CONFIGURATION FROM THE CLI 1. Connect to the AP by using Telnet, SSH, or a serial connection. 2. Turn Radio 2 on if the status is not currently up. set radio wlan1 status on 3. Set the mode to IEEE 802.11b/g/n. set radio wlan1 mode bg-n 4. Set the channel to 6. set radio wlan1 channel-policy static set radio wlan1 static-channel 6 5. Set the channel bandwidth to 40 MHz. set radio wlan1 n-bandwidth 40 6. Allow a maximum of 100 stations to connect to the AP at a time. set bss wlan1bssvap0 max-stations 100 7. Set the transmit power to 75 percent. set radio wlan1 tx-power 75 Page 120 Configuring Radio Settings 34CSFP6XXUAP-SWUM100-D13
D-Link UAP
Software User Manual
12/10/09
Page
120
Configuring Radio Settings
34CSFP6XXUAP-SWUM100-D13
8.
Click
Update
to update the AP with the new settings.
R
ADIO
C
ONFIGURATION
FROM
THE
CLI
1.
Connect to the AP by using Telnet, SSH, or a serial connection.
2.
Turn Radio 2 on if the status is not currently up.
set radio wlan1 status on
3.
Set the mode to IEEE 802.11b/g/n.
set radio wlan1 mode bg-n
4.
Set the channel to 6.
set radio wlan1 channel-policy static
set radio wlan1 static-channel 6
5.
Set the channel bandwidth to 40 MHz.
set radio wlan1 n-bandwidth 40
6.
Allow a maximum of 100 stations to connect to the AP at a time.
set bss wlan1bssvap0 max-stations 100
7.
Set the transmit power to 75 percent.
set radio wlan1 tx-power 75