Danby DAC5111M Product Manual - Page 7

Installation Instructions LOCATION Fig. 2 20" Min Awning 12" Min Side 30" Min Obstruction Ground 20" Min Fence, wall, or other obstacle 1) Assembly of the Upper Channel to Cabinet. (Factory installed on some units) • "L" Shaped Top Channel: Install the "L" shaped channel to the top of the cabinet as shown in Fig. 3, using four (4) 3/8" screws. 2) Assembly of the Side Curtains to Cabinet. • Extend the shutter from the shutter frame and slide it into the shutter tabs on the side channel of the air conditioner, as shown in Fig. 4. • Slide the shutters into the top ("L" Shaped) and bottom ("U" Shaped) channels. The shutters are identified (on frame) as left and right. 3) Completing the Installation • Cut the foam (non adhesive) sealing strip to fit the area of the window sill that the air conditioner will rest on. Fig. 3 3/8" screws Fig. 4 "L" shaped mounting bracket "U" shaped Channel (Factory Installed) Slide down into tabs Shutter tabs Shutter Shutter frame 6