Danby DBC514BLS Product Manual - Page 11

Trouble Shooting Before You Call For Service Problem No Power. Cabinet Temperature too High Condensation on the cabinet and/or doors Possible Cause What to do A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or reset circuit breaker. Power surge. Unplug the beverage center, wait a few seconds and then plug it back in. Plug not fully inserted into wall outlet Make sure the 3-prong plug is fully inserted into outlet. Temperature setting Verify the temperature control setting. adjust if neccessary Door not shut properly or opened excessively Ensure that the door is fully closed and that the gasket is sealing. against the cabinets. Open the doors only as needed and for short periods of time Interior lights toggled on The interior lights are intended for temporary lighting of cabinets for display purposes only. They are not intended to be left on for prolonged time periods Exhaust vent is obstructed Verify there is nothing blocking the front mounted exhausting vent. Recently added a large quantity of warm beverages to the cabinet Limit the quantity of warm beverages being introduced to the cabinet at the same time. Attempt to stagger the load introduction if possible. High humidity conditions in the home. The condensation will subside once humidity conditions return to normal. Door not shut properly or opened excessively Ensure that the door is fully closed and that the gasket is sealing. against the cabinets. Open the door only as needed and for short periods of time If none of the above rectify the situation please contact our customer care department at 1-800-26- (1-800-263-2629) 10