Danby DWC508BLS Product Manual - Page 6
Operating Intructions Cont'd - 50
View all Danby DWC508BLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
OPERATING INTRUCTIONS (cont'd) SETTING THE TEMPERATURE Important: In the event of a power failure, wait 3 to 5 minutes before restarting. • To switch the display between the Fahrenheit (°F) and Celsius (°C) scale, depress the 'Set Upper' and 'Set Lower' control buttons simultaneously for approximately five (5) seconds. • The temperature range can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific wine storage requirements. Each depression of the 'Set Upper' or 'Set Lower' button will allow you to adjust the temperature in 1° increments within the aforementioned range. • You may view your 'set' temperature at any time by briefly depressing either the 'Set Upper'or 'Set Lower' button. WINE STORAGE The Maximum Capacity* of the DWC508BLS is 50 (750mL) wine bottles. * When stocked as per instructions below. In order to achieve the maximum storage capacity of fifty (50) bottles, it will be necessary to position 4 bottles on the top shelf as in Fig. A. Next, arrange 8 bottles on the second to the sixth shelf, alternately as shown in Fig. B. Finally, arrange 6 bottles on the bottom shelf as in Fig. C; this will allow for the total storage of fifty (50) 750mL wine bottles. Fig A Fig B Fig C SHELF IMPORTANT! INSTRUCTIONS Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air circulation within the cabinet. To remove a rack from its locked position, tilt the rack as shown in Fig. D and pull outward To re-install, ensure the rack is resting securely on the support brackets and push the rack inward until it locks into place. Fig. D 5