Dell 2155CDN User Manual - Page 190

Fax Settings Receive Mode Displays the fax receiving mode. Auto Receive Fax Displays the interval at which the printer goes into the fax receive mode after receiving an incoming call. Auto Receive Tel/Fax Displays the interval at which the printer goes into the fax receive mode after the external telephone receives an incoming call. Auto Receive Answer/Fax Displays the interval at which the printer goes into the fax mode after the external answering machine receives an incoming call. Line Monitor Displays the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a connection is made. Ring Tone Volume Displays the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal speaker when Receive Mode is set to Telephone/Fax. Line Type Displays the line type; PSTN or PBX. Tone/Pulse Displays whether to use tone or pulse dialing. Resend Delay Displays the interval between re-send attempts. Redial Attempts Displays the number of redial attempts to make if the destination fax number is busy. Redial Delay Displays the interval between redial attempts. Junk Fax Setup Displays whether to reject faxes sent from unwanted stations. Remote Receive Displays whether to receive faxes by pressing a remote receive code on the external telephone. Remote Receive Displays the 2-digit remote receive code when Tone Remote Receive is On. Fax Header Displays whether to print the information of the sender on the header of faxes. Fax Header Name Displays the name of the sender that will be printed on the header of faxes. Fax Number Displays the fax number of the printer, which will be printed on the header of faxes. 188 Dell Printer Configuration Web Tool