Dell 3130cn User Guide - Page 114
Load <src> with <x>, Maintenance, Menu access turned off by system administrator, Menus are Disabled
UPC - 335531305295
View all Dell 3130cn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Load with Try one or more of the following: • Load the tray or other source with the correct paper type and size. • Cancel the current job. Maintenance Replace the maintenance items and, if necessary, reset the printer maintenance counter. For information on purchasing supplies, see "Ordering supplies" on page 126. Menu access turned off by system administrator The printer menus cannot be accessed because your system support person disabled the menus. Wait for the message to clear. Menus are Disabled The printer menus are disabled. The printer settings cannot be changed from the printer control panel. Contact your system support person for help. Note: When menus are disabled, it is still possible to cancel a print job, print a confidential job, or print a held job. Must be in Ready state to enter menus The printer menus cannot be accessed at this time because the printer control panel does not show the Ready message. Wait for the printer to complete its activity. When Ready appears, press . Narrow media enabled Narrow media is enabled from the Disable Hardware menu of the Config menu. The printer ignores any sensor concerning narrow media. To clear the message, disable narrow media from the Disable Hardware menu. Consult your system support person for help, if needed. Network/Network /Network , The printer is connected to the network, so the network interface is the active communication link. • Network indicates that the printer is using the standard network port built into the printer system board. • Network indicates that an internal print server is installed inside the printer or that the printer is connected to an external print server. • Network , indicates a network interface is the active communication link, where , indicates the active interface is connected to the printer through channel y on PCI connector x. If x equals 0, then the standard network interface is active. Note: The current interface displays on the menus settings page. Wait for the message to clear. Understanding printer messages 114