Dell 3130cn User Guide - Page 115
No jobs to cancel, Not Ready, Parallel/Parallel <x>, PC Kit Life Warning, [PJL RDYMSG], Power Saver
UPC - 335531305295
View all Dell 3130cn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
No jobs to cancel Wait for the message to clear. Not Ready The printer is not ready to receive or process data, or the printer ports are offline. Parallel/Parallel The printer is connected to a parallel port. Parallel interface is the active communication link. Parallel indicates that the printer is using the parallel port. Parallel indicates the active interface is connected to the printer through PCI connector x. Note: The current interface displays on the menus settings page. Wait for the message to clear. PC Kit Life Warning This is the final warning message for the photoconductor kit. The photoconductor kit is near exhaustion. The printer continues printing unless the value for the Cartridge Alarm is changed from the printer control panel or set to On from the Supply Notifications Web page (located on the Embedded Web Server). If the setting is On, then the printer stops printing. Press to select Continue. The printer continues to print until the photoconductor kit is completely exhausted. When the photoconductor kit is exhausted, replace it. [PJL RDYMSG] This is the Printer Job Language (PJL) Ready message. It appears after the Ready or Power Saver message. If the message string is too long, it is truncated. Wait for the message to clear. Power Saver The printer is saving power while it waits for the next print job. Send a job to print to take the printer out of Power Saver mode. Printing Wait for the message to clear. Programming flash DO NOT POWER OFF Wait for the message to clear. Warning-Potential Damage: Do not turn the printer power off while Programming flash appears on the display. Understanding printer messages 115