Dell 5530DN User Guide - Page 32
Installing hardware options, Order of installation, Installing paper drawers
View all Dell 5530DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing hardware options Order of installation Installing paper drawers The printer supports up to four optional drawers. A drawer consists of a tray and a support unit. All drawers are installed the same way. CAUTION-SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Unpack the drawer, and then remove any packing material. 2 Place the drawer in the location chosen for the printer. Note: If you have multiple options to install, then see the section about the recommended order of installation. The 2000-sheet drawer must be the bottom drawer. 3 Align the printer with the drawer, and then lower the printer into place. CAUTION-POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to move it safely. Removing an optional drawer Warning-Potential Damage: Lifting the printer from a drawer without pushing in the safety latches could damage the latches. Additional printer setup 32