Dell Alienware 17 R4 Service Manual - Page 62
Removing the display bezel, Prerequisites, Procedure
View all Dell Alienware 17 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Removing the display bezel NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card. 3. Remove the solid-state drive. 4. Remove the memory modules. 5. Remove the rear-I/O cover. 6. Remove the computer base. 7. Remove the display assembly. Procedure 1. Using your fingertips, carefully pry up the inside edges of the display bezel. 2. Carefully lift the display bezel and turn it over. 3. Disconnect the tobii eye-tracker board cable from the tobii eye-tracker module. 4. Lift the display bezel off the display assembly. 62