Dell Alienware 17 R4 Service Manual - Page 83
Advanced, Performance Options, SupportAssist System Resolution
View all Dell Alienware 17 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Advanced Touchpad Backlight Battery Health Intel Software Guard Extensions BIOS Recovery Performance Options CPU Performance Mode Fan Performance Mode Core Over Clocking Level SupportAssist System Resolution Auto OS Recovery Threshold Table 5. System setup options-Security menu Security Unlock Setup Status Admin Password Status System password Status HDD password Status Admin Password System Password HDD password Password Change Computrace Firmware TPM Allows you to configure the touchpad backlight option. Displays the battery health. Allows you to enable of disable the Intel Software Guard Extensions Default: Disabled Enable the user to recover from certain corrupted BIOS conditions from a recovery file on the user primary hard drive Default: Enabled Enables you to select the CPU performance mode. Default: Enabled Enables you to select the fan performance mode. Default: Balanced Mode Enable or disable the over-clocking setting and adjust the processor flex ratio and voltage in the Customization mode. Default: Disabled Control the automatic boot flow for SupportAssist System Resolution Console and for Dell OS Recovery tool. Displays if the setup status is unlocked. Displays if the administrator password is clear or set. Default: Not set Displays if the system password is clear or set. Default: Not set Displays if the HDD password is clear or set. Default: Not set Allows you to set the administrator password. The administrator password controls access to the system setup utility. Allows you to set the system password. The system password controls access to the computer at boot. Allows you to set, change or delete the hard-disk drive password. Allows you to permit or deny system password or HDD password changes. Default: Permitted Enable or disable the BIOS module interface of the optional Computrace Service from Absolute Software. Enables you to enable or disable the firmware TPM function. Default: Enabled 83