Dell Alienware 17 R5 Service Manual - Page 107
the latch to secure the cable.
View all Dell Alienware 17 R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
2 Align the screw holes on the touchpad bracket with the screw holes on the palm-rest assembly. 3 Replace the five screws (M2x3) that secure the touchpad bracket to the palm-rest assembly. 4 Slide the touchpad cable and touchpad buttons cable into their respective connectors on the touchpad and close the latches to secure the cables. 5 Slide the touchpad cable into the connector on the system board and close the latch to secure the cable. Post-requisites 1 Replace the battery. 2 Replace the computer base. 3 Replace the rear-I/O cover. 4 Replace the solid-state drive. 5 Replace the wireless card. 6 Follow the procedure from step 4 to step 7 in "Replacing the hard drive". 107
2
Align the screw holes on the touchpad bracket with the screw holes on the
palm-rest assembly.
3
Replace the five screws (M2x3) that secure the touchpad bracket to the
palm-rest assembly.
4
Slide the touchpad cable and touchpad buttons cable into their respective
connectors on the touchpad and close the latches to secure the cables.
5
Slide the touchpad cable into the connector on the system board and close
the latch to secure the cable.
Post-requisites
1
Replace the
battery
.
2
Replace the
computer base
.
3
Replace the
rear-I/O cover
.
4
Replace the
solid-state drive
.
5
Replace the
wireless card
.
6
Follow the procedure from step 4 to step 7 in “
Replacing the hard drive
”.
107