Dell Alienware 17 R5 Service Manual - Page 39
Removing the rear-I/O cover, Prerequisites, Procedure
View all Dell Alienware 17 R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Removing the rear-I/O cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure 1 Remove the two screws (M2.5x7) that secure the rear-I/O cover to the palmrest assembly. 2 Using a plastic scribe, disengage the rear-I/O cover from the computer base on the proper pry locations. 39
Removing the rear-I/O cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your computer
.
For more safety best practices, see the Regulatory Compliance home
page at
www.dell.com/regulatory_compliance
.
Prerequisites
Remove the
base cover
.
Procedure
1
Remove the two screws (M2.5x7) that secure the rear-I/O cover to the palm-
rest assembly.
2
Using a plastic scribe, disengage the rear-I/O cover from the computer base
on the proper pry locations.
39