Dell Alienware Aurora R5 Aurora R5 Service Manual - Page 134
Enabling or disabling the USB in BIOS setup program, Fixing a no-boot issue caused by USB emulation
View all Dell Alienware Aurora R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
3 Expand System devices. Enabling or disabling the USB in BIOS setup program 1 Turn on or restart your computer. 2 Press F2 when the AlienHead logo is displayed on the screen to enter the BIOS setup program. The BIOS setup program is displayed. 3 On the Advanced tab, select USB Configuration. 4 Select the Front USB Ports or Rear USB Ports options to enable or disable the ports respectively. 5 Save the BIOS setup program settings and exit. Fixing a no-boot issue caused by USB emulation Sometimes the computer does not boot to the operating system when USB devices are connected to the computer during startup. This behavior occurs because the computer is looking for bootable files in the USB devices. Follow these steps to fix the no-boot issue: 1 Turn on or restart your computer. 2 Press F2 when the AlienHead logo is displayed on the screen to enter the BIOS setup program. The BIOS setup program is displayed. 3 On the Advanced tab, select USB Configuration. 4 Select the USB Boot Support to disable it. 5 Save the settings and exit. Wi-Fi Alienware Aurora R5 is shipped with Wi-Fi 802.11b/g/n or Wi-Fi 802.11ac. 134