Dell Alienware Aurora R5 Aurora R5 Service Manual - Page 76
Replacing the processor fan and heat-sink assembly, Procedure, Post-requisites
View all Dell Alienware Aurora R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Replacing the processor fan and heat-sink assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure NOTE: The original thermal grease can be reused if the original processor and heat-sink assembly are reinstalled together. CAUTION: If either the processor or the heat-sink assembly is replaced, use the thermal grease provided in the kit to ensure that thermal conductivity is achieved. 1 Place the processor fan and heat-sink assembly on the processor. 2 Align the captive screws on the processor fan heat-sink assembly with the screw holes on the system board. 3 Tighten the captive screws that secure the processor fan and heat-sink assembly to the system board. 4 Connect the processor-fan cable to the system board. Post-requisites 1 Follow the procedure from step 10 to step 11 in "Replacing the power-supply unit". 2 Replace the left-side cover. 76