Dell C3760n Dell /C3760dn Color Laser Printer Users Guide - Page 215
Color Reg Adjust, Reset Defaults, Initialize Print Meter, Reset Fusing Unit, Reset Transfer Belt Unit
View all Dell C3760n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
Color Reg Adjust Purpose: To manually perform color registration adjustment. Manual Color Registration Adjustments are required when the printer is initially installed and after the printer is moved. NOTE: The Color Reg Adjust feature can be configured when Auto Reg Adjust is set to Off. Values: Auto Correct Color Regi Chart Enter Number Cancel* Start Yes No* LY LM LC RY RM RC PY PM PC Does not perform color registration correction. Automatically performs color registration correction. Prints a color registration chart. The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On the chart, find the values on the right side that are next to the line that is perfectly straight for each of the three colors. If the value for this line is 0, color registration adjustment is not required. If the value for this line is any value other than 0, specify the adjustment values under lateral adjustment and process adjustment in Enter Number. Does not print a color registration chart. Available Range: -9 to +9 Available Range: -9 to +9 Sets lateral (perpendicular to paper feed direction) and process (paper feed direction) color adjustment values individually for Yellow, Magenta, and Cyan. Enter a number in order of lateral adjustment (left), lateral adjustment (right), and process adjustment. Press the (Set) button to save all the settings. Available Range: -9 to +9 Reset Defaults Purpose: To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu parameters are reset to their default values. Initialize Print Meter Purpose: To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero. Reset Fusing Unit Purpose: To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter. Reset Transfer Belt Unit Purpose: To initialize the life counter of the transfer belt unit. After replacing the transfer belt unit, be sure to initialize its life counter. Understanding the Printer Menus 213