Dell Connectrix MDS 9132T Connectrix Cisco MDS-9000NX-OS 9.3.1 Release Note - Page 19
N_Port virtualization configuration limits, Supported iSCSI sessions, Supported zoning parameters
View all Dell Connectrix MDS 9132T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Technical notes Table 14 SME configuration limits (page 2 of 2) Host and target ports in a cluster 128 Number of hosts per target 128 Tape backup groups per cluster 2 Volume groups in a tape backup group 4 Cisco Key Management Center (# of 32K keys) Targets per switch that can be 32 FC-redirected N_Port virtualization configuration limits The NPV features have maximum configuration limits. Table 15 shows the verified and maximum limits for the NPV switches running NX-OS Release 5.x. Table 15 NPV features limitations Feature FLOGIs or F Disc per NPV port group NPV switches per NPV core switch FLOGIs per line card on NPV core switch Verified limits 114 105 400 Maximum limits 114 105 400 Supported iSCSI sessions For the most up-to-date supported iSCSI environment and parameters for Connectrix switches, refer to the iSCSI SAN Topologies Guide available at: https://elabnavigator.dell.com/vault/pdf/iSCSI.pdf?key=1442426704540 For the most up-to-date information, refer to the Dell Support Matrix, available through E-Lab Interoperability Navigator at: https://elabnavigator.dell.com/eln/modernHomeSSM and https://elabnavigator.dell.com/eln/extendedSupport for the latest information on supported configurations. Supported zoning parameters Refer to the Topology Resource Center for the most up-to-date information on supported zoning parameters at: https://elabnavigator.dell.com/eln/topologyResource?page=topology. Supported IVR parameters IVR zone members 4000 per physical fabric IVR zones 2000 per physical fabric IVR zone sets 32 per physical fabric An RPQ can be submitted for any configurations that exceed this limit. Dell Connectrix Cisco MDS 9000 Release Notes 19