Dell External OEMR XL R610 Technical Guide - Page 35
Dell External OEMR XL R610 Manual
View all Dell External OEMR XL R610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Dell The PowerEdge R610 BIOS accesses the I2C through the ICH9 (Intel I/O Controller Hub 9). There are two multiplexers (MUX) on the ICH9 I2C bus. One MUX (U_ICH_SPD) controls the DIMM SPDs through four split segments The other MUX (U_ICH_MAIN) controls the clock buffers, TOE, and USB Hub through four split segments. BIOS controls both the MUXes through the two select lines using GPIO pins. The clock chip, USB hub, and the front panel EEPROM device addresses are located on the IOH I2C bus. PowerEdge R610 Technical Guide 35
Dell
PowerEdge R610 Technical Guide
35
The PowerEdge R610 BIOS accesses the I
2
C through the ICH9 (Intel I/O Controller Hub 9). There are
two multiplexers (MUX) on the ICH9 I
2
C bus.
One MUX (U_ICH_SPD) controls the DIMM SPDs through four split segments
The other MUX (U_ICH_MAIN) controls the clock buffers, TOE, and USB Hub through four split
segments.
BIOS controls both the MUXes through the two select lines using GPIO pins.
The clock chip, USB hub, and the front panel EEPROM device addresses are located on the IOH I
2
C
bus.