Dell Force10 S25-01-GE-24T FTOS 8.4.2.7 Configuration Guide for E-Series TeraS - Page 354

www.dell.com | support.dell.com Set the Frequency of FTSA Type 3 Messages When messaging is enabled, FTSA sends an E-mail every 24 hours containing inventory information to all recipients. There is no facility for setting the frequency for individual recipients. Task Set the frequency at which FTSA generates inventory E-mails. Range: 2 to 10080 minutes Default: 1440 minutes (24 hours) Command frequency minutes Command Mode CALLHOME Generate FTSA Type 4 Messages FTSA can collect and E-mail a user-defined subset of the local system log.These E-mails are Type 4, and Type 4 messages are enabled by default: Step Task Command 1 Ensure that system logging is on, logging on and verify the logging severity level. do show running-config logging 2 Collect and E-mail system log log-messages [delay minutes] messages. [severity level] [filter string] • If you do not use the severity option, FTSA uses 7 by default. • This is the recommended severity level. Lower values will result in partial log data sent to the server because messages with higher values are filtered out. Command Mode CONFIGURATION CONFIGURATION After the initial message, subsequent messages only include log entries with that were generated after the last message was sent to the server so that log messages are not repeated in multiple E-mails. Set Parameters FTSA Type 5 Messages FTSA Type 5 messages have two configurable parameters: Task Command Divert Type 5 messages to the internal flash directory /CALL-HOME-LOGS instead of sending them to FTSA recipients. Filenames include the action list name and a timestamp, and use the file extension .ftsa. log-only Command Mode CALLHOME ACTIONLIST 354 | Force10 Service Agent