Dell Force10 S55T Installing the S55 System - Page 18
Install chassis into rack or cabinet
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
www.dell.com | support.dell.com Follow these steps to attach the brackets to the chassis: Step 1 2 Task Take the brackets and screws out of their packaging. Attach the brackets to the sides of the chassis at the PSU end, using four screws for each bracket. Attach the bracket so that the "ear" faces to the PSU and the outside of the chassis. Power Supply/Fan Module View from Chassis Rear Connect to Rack/Cabinet (ears) Screws View from Chassis Front Screws Power Supply/Fan Module Connect to Rack/Cabinet (ears) Install chassis into rack or cabinet Ensure that there is adequate clearance surrounding the rack or within the cabinet to permit access and airflow. Follow the steps below to install a switch into a two-post 19-inch equipment rack, using the already attached mounting brackets. Step Task 1 Dell Force10 recommends that one person hold the S55 chassis in place while another attaches the brackets to the posts. 18 | Install the S55