Dell Inspiron 14z N411z Inspiron 14z N411z Owners Manual - Page 57
DC-in Connector Assembly, Removing the DC-in Connector Assembly
View all Dell Inspiron 14z N411z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
12 DC-in Connector Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: To help prevent damage to the system board, remove the main battery (see "Removing the Battery" on page 13) before working inside the computer. Removing the DC-in Connector Assembly 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the battery. See "Removing the Battery" on page 13. 3 Remove the module cover. See "Removing the Module Cover" on page 15. 4 Follow the instructions from step 4 to step 5 in "Removing the Optical Drive" on page 23. 5 Remove the keyboard. See "Removing the Keyboard" on page 31. 6 Remove the palm-rest assembly. See "Removing the Palm-Rest Assembly" on page 35. 7 Remove the display assembly. See "Removing the Display Assembly" on page 45. 8 Remove the hinge cover. See "Removing the Hinge Cover" on page 48. 9 Remove the screw that secures the DC-in assembly to the computer base. DC-in Connector Assembly 57