Dell Inspiron 14z N411z Inspiron 14z N411z Owners Manual - Page 65
Camera Module, Removing the Camera Module
View all Dell Inspiron 14z N411z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
14 Camera Module WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: To help prevent damage to the system board, remove the main battery (see "Removing the Battery" on page 13) before working inside the computer. Removing the Camera Module 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the battery. See "Removing the Battery" on page 13. 3 Remove the module cover. See "Removing the Module Cover" on page 15. 4 Follow the instructions in step 4 to step 5 of "Removing the Optical Drive" on page 23. 5 Remove the keyboard. See "Removing the Keyboard" on page 31. 6 Remove the palm-rest assembly. See "Removing the Palm-Rest Assembly" on page 35. 7 Remove the display assembly. See "Removing the Display Assembly" on page 45. 8 Remove the display bezel. See "Removing the Display Bezel" on page 50. 9 Remove the display panel. See "Removing the Display Panel" on page 51. 10 Lift the camera cable off the adhesive tapes on the display cover. Camera Module 65