Dell Inspiron 17 3721 Owner's Manual - Page 72

Replacing the Camera Module, Procedure, Postrequisites

Page 72 highlights

Replacing the Camera Module WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Use the alignment posts on the display back-cover to place the camera module in position. 2 Replace the screw that secures the camera module to the display back-cover. 3 Connect the camera cable to the camera-module connector. Postrequisites 1 Replace the display bezel. See "Replacing the Display Bezel" on page 62. 2 Replace the display assembly. See "Replacing the Display Assembly" on page 59. 3 Follow the instructions from step 3 to step 10 in "Replacing the System Board" on page 43. 4 Replace the palm-rest. See "Replacing the Palm-Rest" on page 33. 5 Replace the keyboard. See "Replacing the Keyboard" on page 19. 6 Replace the memory module(s). See "Replacing the Memory Module(s)" on page 23. 7 Replace the base cover. See "Replacing the Base Cover" on page 21. 8 Follow the instructions from step 3 to step 4 in "Replacing the Optical Drive" on page 16. 9 Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" on page 27. 10 Replace the battery. See "Replacing the Battery" on page 13. 72 | Replacing the Camera Module

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

72
|
Replacing the Camera Module
Replacing the Camera Module
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
After working inside your computer, follow the instructions in "After Working
Inside Your Computer" on page 11. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1
Use the alignment posts on the display back-cover to place the camera module in
position.
2
Replace the screw that secures the camera module to the display back-cover.
3
Connect the camera cable to the camera-module connector.
Postrequisites
1
Replace the display bezel. See "Replacing the Display Bezel" on page 62.
2
Replace the display assembly. See "Replacing the Display Assembly" on page 59.
3
Follow the instructions from step 3 to step 10 in "Replacing the System Board" on
page 43.
4
Replace the palm-rest. See "Replacing the Palm-Rest" on page 33.
5
Replace the keyboard. See "Replacing the Keyboard" on page 19.
6
Replace the memory module(s). See "Replacing the Memory Module(s)" on page 23.
7
Replace the base cover. See "Replacing the Base Cover" on page 21.
8
Follow the instructions from step 3 to step 4 in "Replacing the Optical Drive" on
page 16.
9
Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" on
page 27.
10
Replace the battery. See "Replacing the Battery" on page 13.