Dell Inspiron 3020 Small Desktop Service Manual - Page 43
Processor, Removing the processor
View all Dell Inspiron 3020 Small Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Steps 1. Gently align and place the processor fan and heat-sink assembly on the processor. 2. Align the screw holes on the processor fan and heat-sink assembly with the screw holes on the system board. 3. In a sequential order (1>2>3>4), tighten the four captive screws to secure the processor fan and heat-sink assembly on the system board. 4. Connect the fan and heat-sink assembly cable to the connector on the system board. Next steps 1. Install the fan shroud. 2. Install the left-side cover. 3. Follow the procedure in After working inside your computer. Processor Removing the processor CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. 3. Remove the fan shroud. 4. Remove the fan and heat-sink assembly. About this task The following image indicates the location of the processor and provides a visual representation of the removal procedure. Removing and installing components 43