Dell Latitude 6430u Owners Manual - Page 36
Installing the System Board, Removing the Thermal Module
View all Dell Latitude 6430u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing the System Board 1. Place the system board on the chassis. 2. Tighten the screws to secure the system board to the computer. 3. Place the power-connector bracket on the system board. Tighten the screws to secure the power-connector bracket to the computer. 4. Connect the following cables to the system board: a) coin-cell battery b) hall-sensor cable c) smart-card cable 5. Install: a) display assembly b) sniffer board c) palmrest assembly d) keyboard e) base cover f) SD card g) battery 6. Follow the procedures in After Working Inside Your Computer. Removing the Thermal Module 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery 36
Installing the System Board
1.
Place the system board on the chassis.
2.
Tighten the screws to secure the system board to the computer.
3.
Place the power-connector bracket on the system board. Tighten the screws to secure the power-connector
bracket to the computer.
4.
Connect the following cables to the system board:
a)
coin-cell battery
b)
hall-sensor cable
c)
smart-card cable
5.
Install:
a)
display assembly
b)
sniffer board
c)
palmrest assembly
d)
keyboard
e)
base cover
f)
SD card
g)
battery
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Thermal Module
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
36