Dell Latitude 7220EX Rugged Extreme Tablet Service Manual - Page 19

Option Description If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop. NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the Advanced Battery Charge Configuration option. Battery#2 Charge Configuration Allows you to select the charging mode for the battery. The options are: • Adaptive-enabled by default • Standard-Fully charges your battery at a standard rate. • ExpressCharge-The battery charges over a shorter time using Dell's fast charging technology. • Primarily AC use • Custom If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop. NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the Advanced Battery Charge Configuration option. Dock Battery Charger Mode Allows you to select the charging mode for the battery. The options are: • Standard-enabled by default • ExpressCharge-The battery charges over a shorter time using Dell's fast charging technology. Type-C Connector This allows you to set the maximum power that can be drawn from the Type-C connector. The options are: Power • 7.5 Watts-enabled by default • 15 Watts NOTE: Setting a higher power value for the Type-C connector may cause the system to throttle sooner, if the total system power budget is exceeded. Power Usage Mode Allows you to choose the system power usage mode. The options are: • Power Saver • Balanced-enabled by default • Performance • High Performance POST behavior Option Description Adapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters. Default setting: Enable Adapter Warnings USB-C Warnings Allows you to enable the system displays warning messages for USB-C devices. Enable Dock Warning Messages. This option is enabled by default. Keypad (Embedded) Allows you to select one of the two methods to enable the keypad that is embedded in the internal keyboard. • Fn Key Only-enabled by default • By Numlock Fn Lock Options Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1-F12, between their standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these keys. The available options are: • Fn Lock-enabled by default • Lock Mode Disable/Standard-enabled by default • Lock Mode Enable/Secondary Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are: • Minimal System setup 19