Dell Latitude ATG D630 User's Guide - Page 121
Carefully remove the card cable from its routing guide., While grasping the card cable with one hand
View all Dell Latitude ATG D630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer. If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed. 1 Follow the procedures in "Before You Begin" on page 115. 2 Remove the hinge cover (see "Hinge Cover" on page 118). 1 2 3 4 5 1 connector wire 4 metal securing tab 2 plastic scribe 5 plastic securing tab 3 plastic securing tab NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components. 3 Carefully remove the card cable from its routing guide. 4 While grasping the card cable with one hand, use a plastic scribe to gently pry the card out from underneath the metal tab with the other hand. 5 Lift the card from the compartment, ensuring that you do not pull on the card cable with excessive force. 6 Disconnect the card from the cable and remove the card from the computer. Adding and Replacing Parts 121