Dell Latitude D620 ATG Service Manual - Page 36

Installing the System Board

Get Dell Latitude D620 ATG PDF manuals and user guides View all Dell Latitude D620 ATG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

1 fan 2 M2.5 x 5-mm screws (4) (identified by silver cable triangles on the system board) 3 modem antenna connectors (2) 17. Remove the four 5-mm hex screws on the back of the computer. 18. Lift the system board out and away from the base. 1 system board 2 base Installing the System Board 1. Perform all the steps in Removing the System Board in reverse order. NOTICE: When installing the system board, ensure that the fan cable and antenna cables are clear of the system board before fitting it into the base, that the audio connectors are properly seated, and that the tab for the wireless switch fits properly into the detent on the slider mechanism before installing the system board into the base.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
17.
Remove the four 5-mm hex screws on the back of the computer.
18.
Lift the system board out and away from the base.
Installing the System Board
1.
Perform all the steps in
Removing the System Board
in reverse order.
1
fan
cable
2
M2.5 x 5-mm screws (4) (identified by silver
triangles on the system board)
3
modem antenna
connectors (2)
1
system board
2
base
NOTICE:
When installing the system board, ensure that the fan cable and antenna cables are clear of the system board before fitting it into the base,
that the audio connectors are properly seated, and that the tab for the wireless switch fits properly into the detent on the slider mechanism before
installing the system board into the base.