Dell Latitude E6400 ATG Setup and Quick Reference Guide - Page 22
Secure Digital SD Memory-Card Reader, Memory, Ports and Connectors, SD, SDIO, SD HC - service manual
View all Dell Latitude E6400 ATG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Secure Digital (SD) Memory-Card Reader Cards supported SD, SDIO, SD HC, Mini SD (with adapter) MMC, MMC+, Mini MMC (with adapter) Memory Memory module connector two DIMM sockets Memory module capacities 512 MB (one DIMM) 1 GB (one DIMM or two DIMMs) 2 GB (one DIMM or two DIMMs) 3 GB (two DIMMs) 4 GB (one DIMM or two DIMMs) 8 GB (two DIMMs, requires 64-bit Windows XP or Windows Vista operating system) Memory type DDR2 800 MHz (if supported by chipset and/or processor combinations); non-ECC memory only Minimum memory 512 GB Maximum memory 8 GB (requires 64-bit Windows XP or Windows Vista operating system) NOTE: In order to take advantage of the dual-channel bandwidth capability, both memory sockets must be populated and must match in size. NOTE: The available memory displayed does not reflect the complete maximum memory installed because some memory is reserved for system files. NOTE: To enable Intel® Active Management Technology (iAMT), you must have a DIMM in the memory connector labeled A. For more information about the memory connector see your computer's Service Manual at support.dell.com. For more information about iAMT, refer to the Dell™ Systems Management Administrator's Guide at support.dell.com. Ports and Connectors Audio IEEE 1394a microphone connector and stereo headphone/speakers connector 4-pin connector 22 Specifications