Dell Latitude E6400 Replacing the Bottom Access Panel - Page 1

Replacing the Bottom Access Panel About Cautions CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. CAUTION: Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. NOTICE: If you need to remove the computer cover, first disconnect the computer power and modem cables from all electrical outlets. To replace the bottom access panel of your computer, you need the iAMT configuration-mode number that is located on the original bottom access-panel of your computer. Follow the instructions on this tech sheet carefully to ensure that you: • Remove the original bottom access-panel from your computer (see your Service Manual). • Select the correct label that is provided in the replacement kit. • Install the label in the correct location on the replacement bottom access-panel. To replace the bottom access panel: 1 Remove the original bottom access-panel from your computer (see your Service Manual). NOTE: If the original iAMT configuration-mode label is missing, damaged, or otherwise illegible, contact Dell to obtain your iAMT configuration-mode number (see your Setup and Quick Reference Guide for contact information). June 2008