Dell Latitude E6400 Replacing the Bottom Access Panel - Page 2

2 Take note of the label that is attached to the inside of the cover. label label You should see one of the following four yellow iAMT configuration-mode labels on the inside of the bottom access panel: 3 Select the matching label from the set of four iAMT configuration-mode labels that came with the new bottom access panel. 4 Install the new label in the matching location on the new bottom access panel. 5 Replace the bottom access panel (see your Service Manual). Information in this document is subject to change without notice. © 2008 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; iAMT is a registered trademark of Intel Corporation in the U.S. and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.