Dell Latitude E6420 Owners Manual - Page 71
Installing the Smart Card
View all Dell Latitude E6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Installing the Smart Card 1. Replace the Smart Card Reader in the computer in its original position. 2. Tighten the screws of the Smart Card Reader. 3. Connect the Smart Card Reader cable on the system board. 4. Install the Palmrest Assembly. 5. Install the Keyboard. 6. Install the Keyboard Trim. 7. Install the Hard Drive. 8. Install the Base Cover. 9. Install the SD Card. 10. Install the Battery. 11. Install the ATG Port Cover (only for E6420 ATG systems). 12. Install the ATG Handle (only for E6420 ATG systems). 13. Follow the procedures in After Working Inside Your Computer. 71
Installing the Smart Card
1.
Replace the Smart Card Reader in the computer in its original position.
2.
Tighten the screws of the Smart Card Reader.
3.
Connect the Smart Card Reader cable on the system board.
4.
Install the
Palmrest Assembly
.
5.
Install the
Keyboard
.
6.
Install the
Keyboard Trim
.
7.
Install the
Hard Drive
.
8.
Install the
Base Cover
.
9.
Install the
SD Card
.
10.
Install the
Battery
.
11.
Install the
ATG Port Cover
(only for E6420 ATG systems).
12.
Install the
ATG Handle
(only for E6420 ATG systems).
13.
Follow the procedures in
After Working Inside Your Computer
.
71