Dell M5200 Medium Workgroup Mono Laser Printer Dell™ Workgroup Laser - Page 47
single-sided printing and face up for double-sided printing. - labels
View all Dell M5200 Medium Workgroup Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
3 Squeeze the length guide lever and slide the length guide to the correct position for the size of print media you are loading. Before loading print media, flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the print media. Straighten the edges of the stack on a level surface. 4 Place the print media into the tray with the recommended print side face down for single-sided printing and face up for double-sided printing. Do not exceed the maximum stack height indicated by the label in the tray. Overfilling the tray may cause jams. Load paper 47
Load paper
47
3
Squeeze the length guide lever and slide the length guide to the correct position for
the size of print media you are loading.
Before loading print media, flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the print media. Straighten the edges of the stack on a level
surface.
4
Place the print media into the tray with the recommended print side face down for
single-sided printing and face up for double-sided printing.
Do not exceed the maximum stack height indicated by the label in the tray. Overfilling
the tray may cause jams.