Dell OptiPlex 7050 Small Form Factor Owners Manual - Page 23
Lift and remove the fan duct from the computer [2]., To remove the heat sink assembly
View all Dell OptiPlex 7050 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
1. Follow the procedure in Before working inside your computer. 2. Remove the: a. cover b. bezel c. 2.5-inch drive assembly d. optical drive 3. To remove the fan duct: a. Pry the retention clips in opposite directions [1]. b. Lift and remove the fan duct from the computer [2]. 4. To remove the heat sink assembly: a. Disconnect the heat sink assembly cable from the system board [1]. b. Loosen the captive screws that secure the heat sink assembly [2] and lift it away from the computer [3]. Disassembly and reassembly 23
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
cover
b.
bezel
c.
2.5–inch drive assembly
d.
optical drive
3.
To remove the fan duct:
a.
Pry the retention clips in opposite directions [1].
b.
Lift and remove the fan duct from the computer [2].
4.
To remove the heat sink assembly:
a.
Disconnect the heat sink assembly cable from the system board [1].
b.
Loosen the captive screws that secure the heat sink assembly [2] and lift it away from the computer [3].
Disassembly and reassembly
23