Dell OptiPlex 7050 Small Form Factor Owners Manual - Page 32
Installing the power switch
View all Dell OptiPlex 7050 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
1. Follow the procedure in Before working inside your computer. 2. Remove the: a. cover b. bezel c. drive assembly d. optical drive 3. To remove the power switch: a. Disconnect the power switch cable from the system board [1]. b. Press the power switch retention tabs and pull out from the computer [2] [3]. Installing the power switch 1. Slide the power switch module into the slot on the chassis until it clicks into place. 2. Connect the power switch cable to the connector on the system board. 3. Install the: a. drive assembly b. optical drive c. bezel d. cover 32 Disassembly and reassembly
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
cover
b.
bezel
c.
drive assembly
d.
optical drive
3.
To remove the power switch:
a.
Disconnect the power switch cable from the system board [1].
b.
Press the power switch retention tabs and pull out from the computer [2] [3].
Installing the power switch
1.
Slide the power switch module into the slot on the chassis until it clicks into place.
2.
Connect the power switch cable to the connector on the system board.
3.
Install the:
a.
drive assembly
b.
optical drive
c.
bezel
d.
cover
32
Disassembly and reassembly