Dell OptiPlex 960 Technology Guide - Page 40
Typical Configuration - e8500
View all Dell OptiPlex 960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
DELL™ OPTIPLEX™ 960 TECHNICAL GUIDE OptiPlex 960 SFF Component CPU Memory HDD (#, capacity) RMSD Graphics Adapter Quiet Configuration E8500 2 GB DDR2 800 MHz 80 GB 2.5" 7200 RPM SATA2 Typical Configuration E8500 2 GB DDR2 800 MHz 160 GB 3.5" 7200 RPM SATA2 CDRW/DVD CDRW/DVD Intel G45 Integrated Adapter AMD HD3450 High-end Configuration Q9450 4 GB DDR2 800 MHz 250 GB 3.5" 7200 RPM SATA2 CDRW/DVD AMD HD3470 The Declared Noise Emission in accordance with ISO 9296 for the Dell Optiplex 960 SFF is as follows1: (all values LWAd expressed in bels2; 1 bel=10 decibels, re 10-12 Watts) Operating Mode Quiet Configuration Declared Sound Power (LWAd) Typical Configuration High-end Configuration Declared Sound Power (LWAd) Declared Sound Power (LWAd) Idle 3.1 HDD Operating 3.2 3.6 3.5 3.6 3.5 ODD Operating 4.9 90% CPU 3.9 4.6 4.9 4.0 4.6 The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5 Pa), at Operator, Bystander, and Desk Side Positions are measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as follows1: Operating Mode Quiet Configuration Declared Sound Pressure (LpA) Typical Configuration Declared Sound Pressure (LpA) High-end Configuration Declared Sound Pressure (LpA) Operator Bystander D e s k S i d e Operator Bystander D e s k S i d e Operator Bystander D e s kSi d e Position Position Position Position Position Position Position Position Position (LpA) (LpA) (LpA) (LpA) (LpA) (LpA) (LpA) (LpA) (LpA) Idle 23 19 17 28 24 20 27 23 19 HDD Operating 23 19 17 28 24 20 27 23 19 ODD Operating 39 34 40 40 35 32 40 34 30 90% CPU 29 24 18 32 27 24 37 33 29 1 All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed at 90% utilization with no other peripheral device spinning. This test mode is not specified in ISO 7779, but was measu2red using the same microphone distances and measurement techniques defined for the other reported operating modes. Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2 40