Dell PowerConnect 5424 Command Line Interface Guide - Page 143

copy The copy Privileged EXEC command copies any file from a source to a destination. Syntax • copy source-url destination-url [snmp] • source-url - The location URL or reserved keyword of the source file to be copied. (Range: 1 - 160 characters) • destination-url - The destination file URL or reserved keyword of the destination file. (Range: 1 - 160 characters) • snmp - Used only when copying from/to startup-config. Specifies that the destination/source file is in SNMP format. The following table displays keywords and URL prefixes. Keyword flash running-config startup-config image boot tftp: xmodem: null: backup-config logging Source or destination Source or destination URL for Flash memory. It's the default in case a URL is specified without a prefix Represents the current running configuration file. Represents the startup configuration file. If source file, represent the active image file. If destination file, represent the non-active image file. Boot file. Source or destination URL for a TFTP network server. The syntax for this alias is tftp://host/[directory]/filename. The host can be IPv4 address, IPv6 address or hostname. Source for the file from a serial connection that uses the Xmodem protocol. Null destination for copies or files. A remote file can be copied to null to determine its size. Represents the backup configuration file. Copy from a syslog file. Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode. Configuration and Image 143