Dell PowerConnect 6224P User's Guide - Page 596
Zero Priority Packets Received, State Transitioned to Master
View all Dell PowerConnect 6224P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 596 highlights
• State Transitioned to Master - The total number of times that this virtual router's state has transitioned to Master. • Advertisement Received - The total number of VRRP advertisements received by this virtual router. • Advertisement Interval Errors - The total number of VRRP advertisement packets received for which the advertisement interval was different than the one configured for the local virtual router. • Authentication Failure - The total number of VRRP packets received that did not pass the authentication check. • IP TTL Errors - The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255. • Zero Priority Packets Received - The total number of VRRP packets received by the virtual router with a priority of 0. • Zero Priority Packets Sent - The total number of VRRP packets sent by the virtual router with a priority of 0. • Invalid Type Packets Received - The number of VRRP packets received by the virtual router with an invalid value in the Type field. • Address List Errors - The total number of packets received for which the address list does not match the locally configured list for the virtual router. • Invalid Authentication Type - The total number of packets received with an unknown authentication type. • Authentication Type Mismatch - The total number of packets received with an authentication type different to the locally configured authentication method. • Packet Length Errors - The total number of packets received with a packet length less than the length of the VRRP header. Displaying Virtual Router Statistics 1. Open the Virtual Router Statistics page. 2. Select the virtual router for which you want to display statistical information from the VRID and VLANID field. This information displays only if there is a valid VRRP configuration. Displaying Virtual Router Statistics Using CLI Commands For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • Virtual Router Redundancy Protocol Commands The following table summarizes the equivalent CLI commands for this feature. 596 Configuring Routing