Dell PowerConnect 6224P Configuration Guide - Page 51
CLI Examples, Example #3: Show Port Security on an Interface
View all Dell PowerConnect 6224P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
CLI Examples The following are examples of the commands used in the Port Security feature. Example #1: Enable Port Security on an Interface console(config)#interface ethernet 1/g18 console(config-if-1/g18)#port security ? discard max learned trap Press enter to execute the command. Discard frames with unlearned source addresses. Configure the maximum addresses that can be on the port. Sends SNMP Traps, and specifies the minimum time between consecutive traps. console(config-if-1/g18)#port security Example #2: Show Port Security console#show ports security ? addresses Addresses. ethernet Ethernet port. port-channel Link Aggregation interface. Press enter to execute the command. Example #3: Show Port Security on an Interface console#show ports security ethernet 1/g18 Port Status Action Maximum Trap Frequency 1/g18 Locked Discard 100 Disable 30 Switching Configuration 51